Existing usage |
||||
![]() |
Satellite picture
|
|||
![]() |
Afternoon view from the South South East | |||
![]() |
Shadows at 9:45 AM DST, May 28, 2007 | |||
![]() |
Shadows at 9:45 AM DST, May 28 | |||
![]() |
Down slope view to the South West, Afternoon |
|||
![]() |
Down slope view to the West South West, Afternoon Roof slope 20 degrees to the South, Azimuth, about 190 degrees true. |
|||
![]() |
Planed horizontal dimension ~20 feet. 240 inches. 270 inches up-slope 12ft == 144 inches |
|||
![]() |
Module layout on south facing roof. |
|||
![]() |
Morning shade Elevation angle from point A to the South East 30 degrees, from top of south facing slope. |
|||
![]() |
Evening shade Elevation angle from point B to the South West 20 degrees, from top of south facing slope. |
|||
![]() |
Under house entry | |||
![]() |
Under house area, DC disconnect and SMA 6000U simulated.
|
|||
![]() |
SMA 6000u owners manual. A .pdf file. | |||
![]() |
Furnace sub box, not part of grid tie system. | |||
![]() |
Output from solar box to go through under ground
conduit. Output wires: ( AC ) 2 EA #8 red 3 EA #8 black A neutral may be needed with SMA6000U Ground wire, green. Spare wire |
|||
![]() |
P G & E meter area at the well house |
|||
![]() |
||||
![]() |
Existing main circuit breakers | |||
Planned addition of disconnect box for solar grid tie system. 1/2 inch rigid conduit through disconnect cavity to meter cavity. Has
1/2 inch side arm pull installed, |
||||
Meter
removal done to view live circuits while cutting hole. |
![]() |
![]() |
||
![]() |
Box inside well house supplies sub panel in garage of house. | |||
![]() |
Box inside well house supplies sub panel in garage of house. | |||
| Installation of AC conduit from P G & E disconnect box. | |
![]() |
Near well house. Disconnect box not yet installed. |
![]() |
|
![]() |
Entry to crawl space of main house through footing. |